Model-specific evidence, with clear limits
Use this dossier to check the identified VMS models against the certificate, its annexes and the requirements of a European road-sign project. Match the proposed equipment and the relevant Declaration of Performance to the required classes.
The published document is Certificate of Constancy of Performance 2531-CPR-CSC10059, issued by DBI Certification (notified body 2531) on 8 May 2026. It identifies VMS16S-4535RGB and VMS10S-4535RGB and refers to EN 12966-1:2005+A1:2009. Read the complete three-page certificate and its annexes, not a headline alone.
Certificate and annex reading guide
| Certificate reference | 2531-CPR-CSC10059 |
|---|---|
| Models | VMS16S-4535RGB; VMS10S-4535RGB |
| Edition | Issued 8 May 2026; supersedes the version issued 17 June 2025 |
| Optical classifications in Annex 1 | C2; L3 and L3(*); R3; B6 |
| Environmental classifications in Annex 1 | T1 / T3; pollution D3; enclosure P3 (IP56) |
| Structural limitations | Several structural characteristics are NPD (No Performance Determined); see Annex 1 |
| Current status | The document states conditional continuing validity; no live issuer-status confirmation is represented by this page |
Important distinction: IP56, not IP65
The certificate Annex 1 records P3 (IP56). Report GZES231102107504 Amendment 01 also describes dust and water penetration results as IP56, using IP5X and IPX6 tests. IP56 and IP65 are different designations and must not be reversed in a specification.
What the evidence does not replace
NPD is not a failure result, but it is not a declared performance value either. Project-specific support structures, wind and other loads, installation design and local acceptance need their own review. Temperature-test sequences must not be restated as unconditional continuous operation at every temperature: the report includes different operating and non-operating conditions.
For European procurement, check the required performance classes, the applicable Declaration of Performance, the exact delivered configuration and current certificate status. The archived certificate does not eliminate project-specific or national requirements.
Complete source documents
Download the original full documents below. Document filenames are retained; the link labels describe the contents and report numbers, including the corrosion report that was previously labelled as a model index.
- Complete DBI certificate with Annexes 1–3 (3 pages)
- Visible performance — GZEE231100455331 Amendment 01 (60 pages)
- Temperature test sequences — GZES231102107502 Amendment 01 (16 pages)
- Dust and water penetration: IP56 — GZES231102107504 Amendment 01 (12 pages)
- Vibration — GZES231102107503 Amendment 01 (17 pages)
- Electrical safety and impact — GZES231102107501 Amendment 01 (22 pages)
- EN 12966 test summary — GZEE231100455301 Amendment 01 (29 pages)
- Corrosion test — GZES231102107505 Amendment 01 (4 pages)
Procurement questions
Does this cover every Chipshow VMS?
No. Use the full model references in the certificate and check construction, version and any changes against the associated documents.
Can a test report replace the full certificate and annexes?
No. Read the full dossier and the project specification together. A report addresses its stated scope; it does not automatically provide every approval required for an installation.
How is current status checked?
Confirm status and applicable revisions with the issuer or the relevant verification channel before relying on the certificate for a project.
Evidence references: CS-REG-EN12966-001–004. Document-content review: 16 September 2026. This is not a newly issued certification or a live issuer-status check.
